SERVICE OFFERINGS
IOT BASED SOLUTIONS
Challenges in Current BMS : Conventional Building Management Systems are focused towards monitoring various systems status and few of the analogue value parameters. The purpose is to monitor these points and create a database for history. This database history would be used in future to generate reports. It is also used for capturing a bunch of system Alarms. The BMS Operator spends a lot of time in locating & solving alarms rather than preventing them. Controlling the system more efficiently and taking well informed decisions from the Live data is not a common requirement in conventional BMS.
Conventional BMS systems use lot of cables for communication and proprietary protocols. Systems are no more interoperable. Hence upgrading to newer system becomes tedious due to cables and networking infrastructure.
One more important point but never given any importance by the end user is about the Commissioning – Integrity. The Project engineer does the system commissioning during Project Stages as per control philosophy approved at that time. During operations many changes so happen. Now to adapt real life onsite conditions it needs to be Re-commissioned. Unfortunately this re-commissioning is missing thing in most of sites as it becomes difficult with current setup.
The BMS Systems installed right now are more Proprietary type in nature. This clearly means that BMS systems implemented are not Service Neutral. The one who has installed only can take care of the system. This automatically results into very Expensive AMC Costs. There is quite possibility of arm twisting with the end user for AMC. Proprietary Dongles, Licensed Commissioning Tools, Software Applications , proprietary connectors make the life very difficult for the end user.
One more important point but never given any importance by the end user is about the Commissioning – Integrity. The Project engineer does the system commissioning during Project Stages as per control philosophy approved at that time. During operations many changes so happen. Now to adapt real life onsite conditions it needs to be Re-commissioned. Unfortunately this re-commissioning is missing thing in most of sites as it becomes difficult with current setup.
The BMS Systems installed right now are more Proprietary type in nature. This clearly means that BMS systems implemented are not Service Neutral. The one who has installed only can take care of the system. This automatically results into very Expensive AMC Costs. There is quite possibility of arm twisting with the end user for AMC. Proprietary Dongles, Licensed Commissioning Tools, Software Applications , proprietary connectors make the life very difficult for the end user.
Our Resolution
By now you know that – “ We are Committed to MANage & TECHnically resolve all your challenges …hence we are ManTech “…. We have a solution for you. ManTech’s IoT Based Building Automation solution provides easy connectivity from Sensor to the Centralized software very easily. This software then can send data to any PC, Mobile, Cloud seamlessly. This IOT based solution from ManTech provides a unique ability to Integrate Any Sensor, Any System, Any Protocol over Any Network. The system can be monitored and controlled from Any Device, Any Time from Anywhere in the world. The IOT based Building Automation solution is Non-Proprietary and can be Serviced by any Technician without any Licensed Tools.
ManTech’s IoT Based Building Automation Solution can be 30-35 % Less costly than conventional BMS. This is considering overall cost of the project which includes material as well as engineering costs. Not only this it can save 30 – 35 % operating cost as well. It brings really good value to customer and ROI is really very atrractive.
Instead of using conventional common Reporting tools the IOT based Building automation provides you more about the system incites. The Analytics reports and dynamic and user friendly and user definable Dashboards. The IoT Based Building Automation is a very sophisticated tool that gives a lot of Flexibility to the Customer at the same time very simple to use. The learning curve to adapt this new solution is very small.
ManTech provides an excellent opportunity for the customer to revamp their existing non-performing / non-functional BMS system. Our IOT based Building Automation Solutions Brings Existing BMS to Life. India`s 1st BMS on a Cloud Solution. Not much cabling changes to be done. We can use existing sensors if they are functional , existing Panels, internal cabling, functioning power supplies to reduce the upgradation cost for customer.
We provide following features:
Server Flexibility:
Customer can choose Building Automation Server can be
Customer can choose any System Architecture
ML & AI capabilities :
Data massaging, Using ML & AI on Data Collected the outcomes would be magical and yet very practical. It can be a boon to predictive maintenance because now you can accurately Predict Failures before they occur. The condition monitoring algorithm reports can now Identify Maintenance Issues Proactively. Just image your preventive maintenance output and system uptime will be very high. Equipment’s energy consumption can be studied against wide range of parameters. Reports can deliver you configurations or parameter values for the most energy efficient way to operate the equipment. Now with this we can Improve Energy Consumption at the same time Increase Equipment Life. We will be able to achieve best of the both world….higher efficiency and longer life.
2. IOT BASED Senior Living / Oldage Home Application
3. IOT based Smart Office
4. RTLS based Asset Tracking for Hospitals
5. IOT based Smart Schools
6. IOT based Agricultural Applications
7. Autonomous Guided Vehicle Control – LIDAR
Instead of using conventional common Reporting tools the IOT based Building automation provides you more about the system incites. The Analytics reports and dynamic and user friendly and user definable Dashboards. The IoT Based Building Automation is a very sophisticated tool that gives a lot of Flexibility to the Customer at the same time very simple to use. The learning curve to adapt this new solution is very small.
ManTech provides an excellent opportunity for the customer to revamp their existing non-performing / non-functional BMS system. Our IOT based Building Automation Solutions Brings Existing BMS to Life. India`s 1st BMS on a Cloud Solution. Not much cabling changes to be done. We can use existing sensors if they are functional , existing Panels, internal cabling, functioning power supplies to reduce the upgradation cost for customer.
We provide following features:
Server Flexibility:
Customer can choose Building Automation Server can be
- Cloud Based OR
- On Premises ( Virtual Server )
Customer can choose any System Architecture
- Centralized OR
- Decentralized
ML & AI capabilities :
Data massaging, Using ML & AI on Data Collected the outcomes would be magical and yet very practical. It can be a boon to predictive maintenance because now you can accurately Predict Failures before they occur. The condition monitoring algorithm reports can now Identify Maintenance Issues Proactively. Just image your preventive maintenance output and system uptime will be very high. Equipment’s energy consumption can be studied against wide range of parameters. Reports can deliver you configurations or parameter values for the most energy efficient way to operate the equipment. Now with this we can Improve Energy Consumption at the same time Increase Equipment Life. We will be able to achieve best of the both world….higher efficiency and longer life.
2. IOT BASED Senior Living / Oldage Home Application
3. IOT based Smart Office
4. RTLS based Asset Tracking for Hospitals
5. IOT based Smart Schools
6. IOT based Agricultural Applications
7. Autonomous Guided Vehicle Control – LIDAR